Видео

Thing the fact no mention of prevailing wind and that the ridge section is open to wind gust and rain, shows this wasn’t the best idea for a show case video.

Boş teneke bir ucarsa adamın kafasını keser en iyi kiremit ömürlük

Despite what it says DO NOT continuously overlap the sheets. You will get eaves creep so that after 4 sheets your eaves line will be about 30mm lower than the first sheet. I suggest you overlap and then underlap and repeat - that way you can maintain a straight eaves. If you decide to put them on battens / "purlins" you will need to think about how the tiles will lay on the barge board pieces. I had to notch the ends of my supports

This stuff is useless. The overlapping sequencing pulls it further away with each consecutve sheet until youre running downhill. Its as fragile as hell, warps and twists and has to be treated very gently, and its also compromised by the amount of screws going through it - not fit for purpose for anything bigger than a garden shed. Believe me, ive tried. And at over £20 a sheet this is no joke. AVOID

Brilliant

I'm considering putting this onto the roof of my gazebo but I'm not sure how I would be able to do this as the roof of my gazebo has 4 angles as it's rectangular in shape and pitched. If anyone can help me with how would best way to join the sheets at the corner/angles I would be very grateful.

ruclips.net/video/ethh26lJnbY/видео.html is exactly what I was looking for (how to cut). Thanks for the tip of using WD40. One more question: Is there a top and bottom side (e.g. fabric side on top, smooth side on bottom) or is this neglectable?

What can I buy this

Corotile lightweight metal roofing system is supplied as 35 tiles per sheet - length per sheet 1140mm, width per sheet 860mm. To discuss your specific requirements contact us on 01246 281111 or info@arielplastics.com

Do you make a pack for bird tables or kennels etc? Ie smaller surface area to cover ?

what fixings would I use for my garage with metal rood frames?

Why can’t this be used for a entire house roof?

Im looking at fitting some of this to a lean to/storage shed. Does it need a flat panel beneath it or can it be nailed directly to the joists?

Video runs too fast. We need a few seconds between each stage to absorb what we've seen, and then move to the next "thought cluster". Remember the New User: we've never seen this before, so don't rush us! Please re-do it?

Thank you for the guide! I've now fitted these shingles to my roof and am delighted with the finish. They were surprisingly easy to fit and the detail strip proved to be a life saver for a clean finish. Anybody looking to order these shingles or any felt shingle, should certainly look online. There are so many great deals to be had, such as at www.roofingmegastore.co.uk/roofing-categories/pitched-roofing/roof-shingles/felt-shingles.html. Hope this helps!